Espruino on ESP8266

Lua is neat, but learning Lua and JavaScript and NodeJS. Although Lua and especially NodeMCU is similar (not only in name) to NodeJS, it would be nicer to use only one language.

Here the recipe:

1. Download espruino_1v87.tve_master_b3dc05b_esp8266.tgz
2. Write flash (note: might use 80m and qio, but my old one does dio):

   ./esptool.py --port /dev/ttyUSB0 --baud 115200 write_flash --flash_freq 40m --flash_mode dio --flash_size 32m \
   0x0000 ~/Downloads/espruino_1v87.tve_master_b3dc05b_esp8266/boot_v1.6.bin \
   0x1000 ~/Downloads/espruino_1v87.tve_master_b3dc05b_esp8266/espruino_esp8266_user1.bin \
   0x3FC000 ~/Downloads/espruino_1v87.tve_master_b3dc05b_esp8266/esp_init_data_default.bin \
   0x37E000 ~/Downloads/espruino_1v87.tve_master_b3dc05b_esp8266/blank.bin

3. Verify it:

   ./esptool.py --port /dev/ttyUSB0 --baud 115200 verify_flash \
   0x1000 ~/Downloads/espruino_1v87.tve_master_b3dc05b_esp8266/espruino_esp8266_user1.bin \
   0x3FC000 ~/Downloads/espruino_1v87.tve_master_b3dc05b_esp8266/esp_init_data_default.bin \
   0x37E000 ~/Downloads/espruino_1v87.tve_master_b3dc05b_esp8266/blank.bin

4. Connect at 115200bps.
5. Connect to your AP:

   var wifi = require("Wifi");
   wifi.connect("your_sid", {password:"your_password"}, function(err){
    console.log("connected? err=", err, "info=", wifi.getIP());
   });
   wifi.stopAP();
   wifi.save();

6. In the Espruino IDE add the IP address
7. When you reconnect via Espruino IDE, you should now have 2 choices: serial or TCP/IP via WLAN